產品特點 Product Features

● 低壓產品符合IEC60439/61439 之規定

● 體積小、安裝容易，不會排放有毒氣體。

● 銅導體成份99.9%，導電率98%IACS 以上。

● 壓降值低、耐短路電流值高，20% 過載2 小時。

● 產品防護等級依據IEC-60529，達IP68，可長期浸泡水中送電運轉，且耐撞擊達IK10 等級。

● 具有防火特性，符合IEC60331-21 950℃ 3 小時及CNS14286 840℃ 3 小時。

● 防爆認證符合EN50028 編號:Exm Ⅱ。

● 利用火山巖硅礦物質與少量的硬化劑混合模而成，具有優良絕緣及散熱特性。在日周溫40 攝氏度時, 總線溫升低于55K。

● 具低電磁干擾特性。

● 絕緣材料等級CLASS H 180℃。

● 產品優良實績已超過40 年以上，且產品經公證試驗機構耐老化試驗，壽命可達50 年以上。

● 免維護保養。

● Low-voltage products comply with IEC 60439/61439 standards

● Compact size, easy installation, no toxic gas emission

● 99.9% pure copper conductor with conductivity exceeding 98% IACS

● Low voltage drop, high short-circuit current withstand capacity, 20% overload for 2 hours

● Protection rating per IEC 60529: IP68, capable of long-term submerged operation, with impact resistance up to IK10

● Fire-resistant performance compliant with IEC 60331-21 (950°C for 3 hours) and CNS14286 (840°C for 3 hours)

● Explosion-proof certification: EN50028 No.: Exm II

● Molded with volcanic rock silicate minerals and minimal hardener, offering excellent insulation and heat dissipation (bus temperature rise <55K at 40° C maximum ambient temperature)

● Low electromagnetic interference characteristics

● Class H 180° C insulation material

● Proven performance record over 40 years, with certified aging tests confirming service life exceeding 50 years

● Maintenance-free operation

母線槽路徑示意圖 Schematic Diagram Of Busbar Path

執行標準Standard Compliance

● GB7251.2-2006

● GB7251.6-2015/IEC61439-6:2012

● XF 537-2005《母線干線系統( 母線槽) 阻燃、耐火性能的試驗方法》

● XF 537-2005 Test Methods for Flame Retardant and Fire Resistance Performance of Busway Trunking Systems (Busways)

● GB/T9978.1 及行業標準and relevant industry standards.

技術規格 Technical Specifications

● 額定電壓Rated Voltage (V):AC1000V。

● 額定電流Rated Current (A):400A~6300A。

● 使用頻率 Frequency (Hz):50/60。

● 系統種類System Types:3Ф4W、3Ф5W。

● 導體材質: 銅導體( 純度:99.97%、導電率:98%IACS 以上) 及鋁導體。

● Conductor Material: Copper conductor (Purity: 99.97%, Conductivity: ≥ 98% IACS) and Aluminum conductor.

● 如通電氣所生產每單一元件應具備之電氣特性:( 長度在4 米以下)。

● Electrical Characteristics of each individual component produced by Rutong Electric (Length below 4 meters):

* 依據標準:XF537-2005,GB7251.6-2015.

* 絕緣耐壓特性: 對每相導體間可耐受AC 5kV/1min; 對每相導體間絕緣電阻為各>DC 1kV 2GΩ。

* 耐火特性: 符合XF537-2005 耐火型母線950℃ -1100℃ 3 小時.

* 溫升特性: 日平均溫35℃，日溫40℃時; 母線溫升≤ 60℃

* 防護等級特性: 符合IEC60529、GB4208，達IP68 規定.

* 機械強度特性: 符合IEC60068-2-75 IK10 等級之規定。

* 接地特性: 如通電低壓耐火母線系統，采用內部接地導體，屬于系統接地，其優點可以穩定對地電壓及減少工安事故。

* Standards Compliance: XF 537-2005, GB 7251.6-2015.

* Insulation Withstand Voltage: Withstands AC 5kV/1min between phases; Insulation resistance > 2GΩ at DC 1kV between phases.

* Fire Resistance: Complies with XF 537-2005, withstanding 950° C - 1100° C for 3 hours.

* Temperature Rise: Busbar temperature rise ≤ 60°C at average daily temperature of 35° C and maximum daily temperature of 40° C.

* Protection Rating: Complies with IEC 60529 / GB 4208, achieving IP68.

* Mechanical Strength: Complies with IEC 60068-2-75, IK10 rating.

* Grounding Characteristics: Rutong's low-voltage fire-resistant busway system utilizes an internal grounding conductor (System Grounding), offering the advantages of stable ground voltage and reduced operational safety risks.

技術規格 Technical Specifications

● 海拔2000m 以下之室內外場所。

● 環境遇溫:-50℃ ~70℃。

● 環境濕度:0%~100%。

● Suitable for indoor and outdoor locations up to 2000m above sea level.

● Ambient temperature: -50℃ to 70℃ .

● Ambient humidity: 0% to 100%.

母線槽接頭之密封采用4 片活動迫緊方式，于橋式接頭定磅螺絲頭鎖斷，指示標簽掉落后，依封蓋鎖緊程序?qū)⒎馍w迫緊固定于母線槽上，母線槽接頭處及封蓋上固態矽質迫緊后會充分的將接縫處密合，以接頭處之防水可靠度達IP68。

The busway joint utilizes a 4-piece active compression sealing system. When the torque-limited shear bolts in the bridge-type joint are tightened to the specified value (causing the bolt heads to snap off), the indicator label will detach. Following the cover tightening procedure, the seal cover is then compressed and secured onto the busway. The solid silicone gaskets at the joint and under the cover fully fill and seal all gaps, ensuring reliable IP68-rated waterproof integrity at the joint.

RTJZ 澆注IP68 母線帶分接單元( 插接箱) Cast IP68 Busway with Tap-off Unit (Plug-in Box)

產品特征: 產品獲得國內并達到防護等級IP68

Product features: the product has obtained the first 3C certification in China and reached the protection level IP68

技術參數 Technical parameter

防火母線系統主要應用于消防輸配電線路、發電機備用電源、以及容易發生火災的用電場所，以保證應急電源在火情下維持工作。

Fire-rated busway systems are primarily used in fire protection power distribution circuits, generator backup power supplies, and fire-prone electrical applications to ensure emergency power sources maintain operation during fire events.